Seit 2018 Vorstandspräsident des Composite United Switzerland

Seit 2017  Leiter des Kompetenzfeld Leichtbau und Faserbundtechnologie an der FHNW

2011-2016 Leiter Bereich Strukturmechanik und Simulation am Faserinstitut Bremen

2009-2011 Wissenschaftlicher Mitarbeiter am Faserinstitut Bremen

2008-2009 Berechnungsingenieur und Softwareentwickler bei der Firma SAMTECH GmbH, Hamburg

2006-2008 Masterstudium (M.Sc.) „Computer Aided Mechanical Engineering“ an der FH Flensburg

2005-2006 Konstrukteur für Strukturen im Kunststofffaserverbund bei der Firma Silence Aircraft GmbH

1991-2005 Diplomstudium des Maschinenbaus (Dipl.-Ing. FH) an der FH Bielefeld

Vorstandspräsident des Composite United Switzerland
https://composites-united.com/cluster/cu-switzerland/

Mitglied des AM Network
www.amnetwork.ch/de/members

Mitglied der Nafems composite work group
www.nafems.org/community/working-groups/composites/

Mitglied bei SAMPE Schweiz
www.sampe.ch/

• FHNW-Projekt SuCoHS (Sustainable and Cost Efficient High Performance Composite)
  
• Ortho Evolution: Schuhkonzept und Stabilisierungssystem
  
• Robotersegment für Raumfahrtanwendung
• Adaptive Wasserturbinenblätter
  

Peer Reviewed

C. Brauner, T. B. Block, A. S. Herrmann, Meso level manufacturing simulation of sandwich structures to analyse viscoelastic dependent residual stresses, Journal of Composite Materials April 2012 vol. 46 no. 7 783-799

C. Brauner, T. B. Block, H. Purol, A. S. Herrmann, Microlevel manufacturing process simulation of carbon fiber/epoxy composites to analyze the effect of chemical and thermal induced residual stresses, Journal of Composite Materials Volume 46 Issue 17, August 2012

K. Schubert, C. Brauner, A. S. Herrmann, Non-damage related influences on Lamb wave based SHM of CFRP structures, Structural Health Monitoring 13 (2014) 158–176

C. Brauner, C. Peters, F. Brandwein, A. S. Herrmann, (2013) Analysis of process-induced deformations in thermoplastic composite materials, Journal of Composite Materials Vol 48, Issue 22, pp. 2779 - 2791

D. Boll, K. Schubert, C. Brauner, W. Lang, Miniaturized flexible iInterdigital sensor for in situ dielectric cure monitoring of composite materials," Sensors Journal, IEEE , vol.PP, no.99, pp.1,1 doi, 10.1109/JSEN.2014.2309172

W. Lang, D. Boll, E. Tolstosheeva, A. Ibragimov, K. Schubert, C. Brauner, C. Pille, Embedding without disruption, The basic challenge of sensor integration, Sensors, 2012 IEEE , vol., no., pp.1,4, 28-31 Oct. 2012 doi, 10.1109/ICSENS.2012.6411479

C. Brauner, S. Bauer, A. S. Herrmann, Analysing process-induced deformation and stresses using a simulated manufacturing process for composite multispar flaps, Journal of Composite Materials, published online before print February 6, 2014, doi, 10.1177/0021998313519281

C. Brauner, P. Soprano, A. S. Herrmann, D. Meiners, Cure-dependent thermo-chemical modelling and analysis of the manufacturing process of an aircraft composite frame, Journal of Composite Materials, published online before print March 25, 2014, doi, 10.1177/00219983145277777

C. Brauner, G.C. Pereira, A. S. Herrmann, Effects of fabric-based unbalances on process-induced distortions of composite materials, Journal of Composite Materials 0021998314533365, first published on May 16, 2014 doi:10.1177/002199831453336

M. Koerdt, S. Kibben, J. Hesselbach, C. Brauner, A. S. Herrmann, F. Vollertsen, L. Kroll, Fabrication and Characterization of Bragg Gratings in a Graded-index Perfluorinated Polymer Optical Fiber, Procedia Technology, Volume 15, 2014, Pages 138-146

C. Brauner, K. Schubert, P. M. Niemeyer, A. S. Herrmann Analysis of the non-linear load and temperaturedependent creep behaviour of thermoplastic composite materials, Journal of Thermoplastic Composite Materials Vol 30, Issue 3, pp. 302 - 317

M. Koerdt, S. Kibben, O. Bendig, S. Chandrashekhar, J. Hesselbach, C. Brauner, A. S. Herrmann, F. Vollertsen, L. Kroll, Fabrication and characterization of Bragg gratings in perfluorinated polymer optical fibers and their embedding in composites, Mechatronics, Volume 34, March 2016, Pages 137-146, ISSN 0957-4158, http://dx.doi.org/10.1016/j.mechatronics.2015.10.005

C. Brauner, T. Frerich, A. S. Herrmann Cure-dependent thermomechanical modelling of the stress relaxation behaviour of composite materials during, Journal of Composite Materials, first published July 2016, DOI: 10.1177/0021998316656924

M A Dimassi, C Brauner and A S Herrmann, Experimental study of the mechanical behaviour of pin reinforced foam core sandwich materials under shear load, IOP Conference Series: Materials Science and Engineering, Volume 118, conference 1
Maryam Kahali Moghaddam, Arne Breede, Christian Brauner, Walter Lang, Embedding Piezoresistive Pressure Sensors to Obtain Online Pressure Profiles Inside Fibre Composite Laminates. Sensors 15, (4), pp 7499-7511, 2015

Maryam Kahali Moghaddam, Arne Breede, Alexander Chaloupka, André Bödecker, Christian Habben, Eva-Maria Meyer, Christian Brauner, Walter Lang, Design, Fabrication and Embeddingof Microscale Interdigital Sensors for Real-Time Cure Monitoring during Composite Manufacturing, Journal of Sensors and Actuators part A, 2016

Frerich, T., Brauner, C., Jendrny, J., & Hermann, A. S. (2019). Modeling the influence of interleaf layers in composite materials on elastic properties, thermal expansion, and chemical shrinkage. Journal of Composite Materials, 53(17), 2415–2428. https://doi.org/10.1177/0021998319830165

Schadt, F, Rueppel, Marvin & Brauner, C & Courvoisier, Yves & Masania, Kunal & Dransfeld, Clemens. (2020). Non-linear Bending Compliance of Thin Ply Composite Beams by Local Compression Flange Buckling.

Brauner, C., Nakouzi, S., Zweifel, L., & Tresch, J. (2020). Co-curing behaviour of thermoset composites with a thermoplastic boundary layer for welding purposes. Advanced Composites Letters. https://doi.org/10.1177/2633366X20902777

Books

Material-Integrated Intelligent Systems - Technology and Applications: Technology and Applications
Chapter 7. Sensor Integration in Fiber-Reinforced Polymers, Maryam Kahali Moghaddam, Mariugenia Salas, Michael Koerdt, Christian Brauner, Martina Hübner, Dirk Lehmhus Walter Lang, Published Online: 1 DEC 2017, DOI: 10.1002/9783527679249.ch7

Technical papers, conferences

C. Brauner, Aerodynamische Auslegung, CFD Simulation und Prototypenbau eines zweisitzigen Ultraleichtflugzeuges, Hamburg, 2005, Diplomica Verlag, ISBN 978-3-8366-2257-8

C. Brauner, G. Hauke, Beschleunigung von Produktinnovationnen durch Simulation mit Samcef, Ingenieursspiegel, 2008, Public Verlagsgesellschft und Anzeigenagentur mgH, Bingen

C. Brauner, A. S. Herrmann, Analyse der prozessbedingten Verformungen einer versteiften CFK Composite-Schale unter der Anwendung von kohäsiver Elemente, NAFEMS Magazin April 2011 Nr. 1/2011, 18 Ausgabe, Fachbeitrag

C. Brauner, T. B. Block, A. S. Herrmann, Mikroskalensimulation des Herstellungsprozesses von Faserverbundwerkstoffen zur Analyse chemisch und thermisch induzierter Eigenspannungen, NAFEMS Magazin November 2011 Nr. 2/2011, 20. Ausgabe, Fachbeitrag

D. Lehmhus, M. Busse, A. S. Herrmann, K. Kayvantash, Structural mecanics and processes in Transportation, Chapter 8 – Polymere Matrix Composite, A.S. Herrmann, A.Stieglitz, C.Brauner, C.Peters, P. Schiebel, 2013 Wiley-VHC Verlag ISBN 978-3-257-32787-4

C. Brauner, Y. Radovcic J.-P. Delsemme, P. Jetteur, September 2008, Advanced non linear failure analysis of a reinforced composite curved beam with delamination and ply degradation, 2nd Int.Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures with COCOMAT Workshop, 3-5 September, TU- Braunschweig

C. Brauner, H. Funke, U. Whilfahrt, S. Paquay, November 2008, Electro thermo-mechanical simulation of electrically heated moulds made of carbon fibre-reinforced plastics composite material, NAFEMS Tagung zu neuen Anforderungen und neuen Möglichkeiten in der Strukturdynamik, 12-13 November, Wiesbaden

C. Brauner, M. Brunyneel, J.-P. Delsemme, P. Morelle, Simulation and Optimization of composite structures with SAMTECH, November 2008, 3rd International Conference “Supply on the wings”, Airtec, 11-13 November, Frankfurt

C. Brauner, Y. Radovcic J.-P. Delsemme, P. Jetteur, Februar 2009, Schädigungsanalyse von Faserverbundstrukturen mittels numerischer Simulation, SAMPE Kongress „Faserverbundwerkstoffe – Innovativ und Sicher“, 18 – 19 Februar, BAM Berlin

C. Brauner, Y. Radovcic J.-P. Delsemme, P. Jetteur, June 2009 , Non linear failure analysis of a reinforced composite curved beam with delamination and ply degradation, NAFEMS World Congress, , 16-18 June, Creta

C. Brauner, Y. Radovcic J.-P. Delsemme, P. Jetteur, Simulation of Stiffened Composite Panel Buckling Considering Ply Degradation and Skin-Stringer Separation, SAMPE EUROPE 31st International Technical Conference, , 12-14 April 2010, Paris

C. Brauner, A. S. Herrmann, C. Hoffmeister, An advanced approach for modeling process induced distortion of CFRP parts using cohesive elements, NAFEMS Seminar, „ Simulation von Schweiß-, Klebe-, Niet- und Schraubverbindungen“, 28 April 2010, Wiesbaden

C. Brauner, A. S. Herrmann, C. Hoffmeister, An advanced approach for modeling process induced distortion of CFRP parts using cohesive elements, NAFEMS Seminar, „ Simulation von Schweiß-, Klebe-, Niet- und Schraubverbindungen“, 28 April 2010, Wiesbaden

C. Brauner, A. S. Herrmann, Simulation der prozessbedingten Ingenieurskonstanten von Faserverbundwerkstoffen, 2. Cluster-Forum Simulation in der Werkstofftechnik Werkstoffe – Prozesse – Defekte, 14. Oktober 2010, DB Museum, Nürnberg

C. Brauner, A. S. Herrmann, T. B. Block, Process simulation of Carbon Fibre / Epoxy composites on the micro level to analyse chemical and thermal induced residual stresses, NAFEMS Seminar, „ Fortschritte in der Simulation von Compositen“, 6-7 April 2011, Wiesbaden

D. Lehmhaus, K. D. Thoben, M. Busse C. Brauner, Potenziale sensorischer und apaptronischer Materielalien und Strukturen für den Leichtbau, 1. VDI Fachkonferenz, Leichtbaustrategien für den Automobilbau, 7-8. Juli 2011, Ludwigsburg

C. Brauner, A. S. Herrmann, T.B. Block, M. Christ, C. Hoffmeister, Analyses of process induced residual stresses of thermoset composite materials, ECCOMAS Composite 2011, 3rd Thematic Conference on the mechanical Response of Composites, 21-23 September 2011, Hannover

T. B. Block, C. Brauner , M. I. Zuardy, A. S. Herrmann, Advanced numerical investigation of the impact behavior of CFRP foam core sandwich structures. ECCOMAS 3rd The-matic Conf. on Mechanical Response of Composites, Hannover, 2011.

C. Brauner, A. S. Herrmann, Manufacturing process simulation of composite multisparflap to analyse process induced deformation and stresses, Samtech User Conference 2011, 15-16 Novembre 2011, Liege

M. Christ, C. Brauner, K. Schubert, A. Stieglitz, S. Kibben, A. S. Herrmann, „Sensor integration and beyond, Sensorial Materials, Smart Materials Processing - Integration of sensors in polymeric composites”, Euromat 2011 , 12. September – 15. September 2011, Montpellier, Frankreich

A. Stieglitz, M. Christ C. Brauner, A. S. Herrmann, „RTM Tool heating and online manufacturing control for accelerated and high quality frame structure production” JEC Show Asia 2011 – International Composite Summit, 18. Oktober – 20. Oktober 2011, Singapur,

C. Brauner, A. S. Herrmann, “Fibre Simulation of Distortion in Composite Structures”, JEC Show Europe 2011, 7. April 2011, Paris

D. Lehmhus, C. Brauner, K. Schubert, M. Christ, S. Kibben, M. Kropp, Sensor integration to sensorial materials – steps towards a technical nervous system in fibre reinforced composites. Bionic Lightweight Structures I, Bremerhaven, Germany, Sept. 05-06 2011

D. Lehmhus, M. Busse, K. Schubert, C. Brauner, K.-D. Thoben, Potenziale sensorischer und adaptronischer Materialien und Strukturen für den Leichtbau. VDI-Fachkonferenz “Leichtbaustrategien für den Automobilbau”, Ludwigshafen, GER, July 07-08 2011

T. B. Block, C. Brauner, K. J. Schubert, D. Boll, A. S. Herrmann, W. Lang, “Online process and material monitoring of composites using dielectric analyzing methods”, Netzsch Seminar, „Advanced CompositesTesting“ JEC Composites 2012, Paris

D. Boll, E. Tolstosheeva, K. Schubert, C. Brauner, W. Lang, Flexible interdigital sensor for dielectric cure monitoring of composites. In, DEWEK 2012. Bremen, Germany

K. Schubert, C. Brauner, T. B. Block, A. S. Herrmann, A compensation method to account for environmental effects on active lamb-wave based SHM. In, Proc. of the 4th International Symposium on NDT in Aerospace, Paper Tu.3.B.2, S. 1-10, Augsburg, November 13-15 2012

T. B. Block, C. Brauner, I. M. Zuardy, A. S. Herrmann, Impact damage resistance of CFRP foam core sandwich panels. ICSS10, 10th International Conference on Sandwich Structures, Nantes, Frankreich, 2012

C. Brauner, A. S. Herrmann, “Analysis of manufacturing induced shape distortions and stress on the Application of a large Composite Structure”, International Conference “Mechanics of Nano, Micro and Macro Composite Structures”, Politecnico di Torino, 18-20 June 2012, Turin, Italy

C. Peters, C. Brauner, M. Schulz, A. S. Herrmann, Tempered spring-in compensation for small car-bon fibre reinforced thermoplastic composites, ITHEC Conference Bremen, 29-30 October 2012, Bremen Germany

F. Pascon, M. Bruyneel, K. Jalta, C. Brauner, A. S. Herrmann, H. Hasselbruch, H. Krieger, T. Gries, Finite element analysis of the thermo-forming process of thermoplastic composite part, NAFEMS World Congress 2013, 9-12 June, Salzburg, Austria, ISBN – 9781874376910

C. Brauner, A. S. Herrmann, S. Bauer , Analysis of process induced distortions and stresses of an integral composite landing flap, NAFEMS World Congress 2013, 9-12 June, Salzburg, Austria, ISBN - 9781874376910

C. Brauner, A. S. Herrmann, K. S. Schubert, Analysis of the nonlinear load and temperature dependent creep behavior of thermoplastic composite materials, ICCS17, 17-21 June 2013, Porto Portugal

A. Lang, C. Brauner, A. S. Herrmann, V. Bitykov, F. Jablonski, Thermomechanisches Verhalten von hybriden CFK-Aluminium Übergangsstrukturen, 19. Symposium Verbundwerkstoffe und Werkstoffverbund der DGM, 3-5. Juli Karlsruhe

C. Brauner, A. S Herrmann, S. Bauer, Virtual process chain analysis for risk reduction in the development of manufacturing processes of composite structures, 2013 European Aerospace Conference, October 3-4, Toulouse

C. Brauner, Analysis of process induced distortions and residual stresses in composite structures, 2013, Herausgeber A. S. Herrmann, Logos Verlag Berlin, ISBN 978-3-8325-3528-5, Science Report Nr 8.

A. Breede, C. Brauner, A.S. Herrmann, Kombinierte Infusions- und Aushärtekontrolle mithilfe der dielektrischen Analyse an dicken Faserverbundbauteilen aus der Windkraft, Praxistag 2014 in Lübeck: Thermische Analyse für spezielle Anwendungen, 21.05.2014

C. Brauner, Prozesssimulation zur effizienten Auslegung von Fertigungsprozessen, 8. Innovation Day „Composite Simulation“ 14.-15. Mai 2014, CFK-Valley Stade, Germany

C. Brauner, A.S.Herrmann, Effects of fabric based unbalances on process induced distortions of composite materials, 16th International Conference on experimental mechanics, 7-11.7.2014, Cambridge, UK

M. Koerdt, S.Kibben, J.Hesselbach, C.Brauner, A.S.Herrmann, L.Kroll, Fabrication and characterization of Bragg gratings in a graded-index perfluorinated polymer optical fibre, 2nd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering, 2.-4.7.2014, Bremen, Germany

C. Brauner, A.S.Herrmann, Experimental and numerical study of the nonlinear load and temperature dependent creep behavior of unidirectional fire reinforced thermoplastic material, Digimat User meeting 2014, 21-23.10.2014 Rom, Italy

C. Brauner, A.Mine. R.Gaitzsch, M.Bruyneel, F.Pascon, A.S.Herrmann Virtual Process Chain combined with Online Process Monitoring for first time right manufacturing of composite structures, “Simulation von Composites –Eine geschlossene Prozesskette?” Nafems 28.-29. 10. 2014 Leipzig, Germany

C. Brauner, A.S. Herrmann, Analysis of the Thermoforming Process of Thermoplastic Composite Parts, ITHEC, 2nd International Conference and Exhibition on Thermoplastic Composites, 27-28.10. 2014, Bremen, Germany

C. Brauner, A.S. Herrmann, Product-process interaction modeling of composite structures using 'As-Built' information, 2015 European Aerospace Engineering Conference 11-12.3.2015 Toulouse, France

M. Bruyneel, M. Attar, C. Brauner, Virtual process chain + online process monitoring = first-time-right manufacturing CompositesWorld, Posted on: 4/30/2015

C. Brauner, A., Miene, M. Bruyneel, F. Pascon, A.S. Herrmann, Advances in virtual process chain and connection with on-line monitoring methods for first time right manufacturing of thermoset laminated composites, NAFEMS World Congress, June 21-24, 2015, San Diego, US

C. Brauner, A. Miene, S. Ochoa, A.S. Herrmann, Virtual Autoclave for evaluation of right boundary conditions for process induced deformation analysis of large composite structures, International Conference on Manufacturing of Advanced Composites ICMAC, 24-25 June 2015, Bristol, UK

M.A. Dimassi, C. Brauner, A.S. Herrmann, Modellierungsansätze für die Simulation des Strukturverhalten von pinverstärkten Schaum sandwichstrukturen am Beispiel einer impaktbelasteten Sandwichschale, Fachkongress COMPOSITE SIMULATION 25-26.2. 2015, Fellbach, Germany

A. Breede M. K. Moghaddam, C. Brauner, W. Lang, A.S. Herrmann, Online Process Montioring and Control by Dielectric and Pressure Sensors for a Composite Main Spar for Wind Turbine Blades, 20th International Conference on Composite Materials 19-24 July 2015 - Copenhagen, Denmark

R. Gaitzsch, M. Koerdt, C. Brauner, L.Kroll, A.S. Herrmann, Signal Evaluation of Fibre Optical Sensors Embedded between Unidirectional Thermoplastic Prepeg Tapes in a Hot-Press Consolidation for Online Process Monitoring, 20th International Conference on Composite Materials 19-24 July 2015 - Copenhagen, Denmark

S. Schröder, B. Reinhardt, C. Brauner, I. Gebauer, R. Buchwald, Crushable Honeycomb Shock Absorber for Landing Platforms without Landing Legs – Virtual and Experimental Testing, 12th International Planetary Probe Workshop, June 15-19, 2015 Cologne, Germany

S. Schröder, B. Reinhardt, C. Brauner, I. Gebauer, R. Buchwald, Development of a Marslander with Crushable Shock Absorber by Virual and Experimental Testing, 66th International Astronautical Congress 12-16.10 2015, Jerusalem, Israel

B. Reinhardt, C. Brauner, S. Schröder, I. Gebauer, R. Buchwald, Touchdown Simulation, testing and Validation of a Marslander Demonstrator, 66th International Astronautical Congress 12-16.10 2015, Jerusalem, Israel

J. Kremberg, C. Brauner, A.S: Herrmann, O. Reinhardt, Numerical investigation and improvement of the crash behavior of a small aircraft composite structure,17th European conference on composite materials ECCM17, 26-30.6.2016 Munich, Germany

M. A. Dimassi, O. Focke, C. Brauner, A.S. Herrmann, Experimental study of the indentation of tied foam core sandwich structures,17th European conference on composite materials ECCM17, 26-30.6.2016 Munich, Germany

M. A Dimassi, C Brauner and A S Herrmann, Experimental study of the mechanical behaviour of pin reinforced foam core sandwich materials under shear load, Materials Science and Engineering, Volume 118, 18th Chemnitz Seminar on Materials Engineering – 18. Werkstofftechnisches Kolloquium

A. Miene, C. Brauner, Using Online Process Monitoring as a Feedback for Process Simulation, 7th International Symposium on Composites Manufacturing for High Performance Applications (ISCM), 24-25.8.2016, Braunschweig, Germany

C. Brauner, F. Pascon, T. van Eekelen, M. Bach, A.Kolovaar, N. Pantelelis. An integrated virtual tool chain for the simulation of the manufacturing process of a composite tidal blade, 7th International Symposium on Composites Manufacturing for High Performance Applications (ISCM), 24-25.8.2016, Braunschweig, Germany

F. Pascon, A. Kharbouche, T. van Eekelen C.Brauner M. Bach, An integrated virtual tool chain for the simulation of thermoset composite manufacturing process, 16th Sampe Europe, 13-15.9.2016, Liege Belgium

S. Schröder, B. Reinhardt, C. Brauner, I. Gebauer, R. Buchwald, Development of a marslander with crushable shock absorber by virtual and experimental testing, submitted by http://www.evise.com/evise/faces/pages/navigation/NavController.jspx?JRNL_ACR=AA

R. Gaitzsch, C. Brauner, B. Schwing, M. Troulis, S. van der Veen, A.S. Herrmann, Feasibility, Relevance and Difficulties of the Sizing of injection-moulded primary Aircraft Structures considering the process-induced Anisotropy, NAFEMS Seminar on Composites Simulation, 56-26.10.2016, Hamburg, Germany

M.Koerdt, C.Brauner, M. Hübner, M.K. Moghaddam, W. Lang, A.S.Herrmann, Integration von minimalinversiven Sensoren in Faserkunststoffverbünde zur Herstellungsprozesskontrolle und Zusandsüberwachung, Symposium für smarte Strukturen und Systeme, Braunschweig, June 2017

C. Brauner, L.Zweifel, C. Dransfeld,M.Rheme, G.Eckhard, J. Mayer, W.Pister, Joining of multi-material assemblies by the MultiMaterial-Welding technology – Development of an online process monitoring system, ITHEC, 4nd International Conference and Exhibition on Thermoplastic Composites, 27-28.10. 2018, Bremen, Germany

P. Tsotra, M. Toma, A. Pascual, F. Schadt, C. Brauner, C. Dransfeld, Thermo-Oxidative Degradation of PEEK at High Temperatures, 18th European Conference on Composite Materials, 25-28 June 2018, Athens

F. Schadt, M. Rueppel, C. Brauner, K. Masania, C. Dransfeld, T. Ricard, Nonlinear Bending Compliance of Closed-Sectioned Composite Beam Structures by Local Compression Flange Buckling, 18th European Conference on Composite Materials, 25-28 June 2018, Athens

J. J. E. Teuwen, J. Asquier P. Inderkum, K. Masania, C. Brauner, I. F. Villegas, C. Dransfeld, Gradient Interphases Between High-Tg Epoxy and Polyetherimide for Advanced Joining Processes, 18th European Conference on Composite Materials, 25-28 June 2018, Athens

L. Zweifel, J. Brunner, S. Nakouzi-Queloz, C. Brauner, C. Dransfeld, Development of a Resistance Welding Process for Thermoset Fiber Composite Components with Co-Cured Thermoplastic Boundary Layer, 18th European Conference on Composite Materials, 25-28 June 2018, Athens

F. Schadt, L. Amirova, C. Brauner, M. Grob, Thermoplastic particle toughening of carbon fiber / cyanate ester composites, 9thEASN International Conference on Innovation in Aviation and Space, Athens 2019

L. Amirova, F. Schadt, C. Brauner, M. Grob, Properties and structure of Cyanate Ester/Polyethersulfone composites, 9thEASN International Conference on Innovation in Aviation and Space, Athens 2019